Baja Motorsports DB30 Assembly Guide - Manual (Page 4)

4 — English © 2010 Baja, Inc. All Rights Reserved.
NOTE: Having two people available will make the assembly
process easier, even if using an overhead hoist.

Carefully cut packing straps and remove cardboard carton.
WARNING:
Do not stand at the front or the rear of the mini bike while
the straps are being cut. Keep the carton level while lifting
and do not allow it to tip forward or backward. Failure to
follow these instructions could result in serious personal
injury.
 Remove box which contains manufacturer’s statement of
origin, assembly guide, operator’s manual, and assembly
hardware.
 Remove and set aside all packaging and wrap from unit
and parts. Do not discard the packing material until you
have carefully inspected and satisfactorily operated the
product.
WARNING:
Do not use this product if any parts on the Loose Parts List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 If any parts are damaged or missing, please call
1-888-863-2252 for assistance.
UNPACKING