Basler Electric BE1-79A 9310200114 - Manual (Page 60)

Figure B-5. ASCII Setup Dialog Box
Step 9: HyperTerminal is now ready to communicate with the relay. Table B-1 describes the required
connection for the RS-232 port.
Table B-1. RS-232 Communication Ports
Connection Type
Front Port 9-pin female DCE
PC to Front RS-232 port cable Straight
Windows
® Vista and Windows® 7
HyperTerminal is not provided with Windows
® Vista or Windows 7. Stand-alone software from other
vendors can be used to communicate with a BE1-79A relay. The configuration of stand-alone software is
similar to that of HyperTerminal.
B-4 BE1-79A Terminal Communication 9310200893 Rev C