Drolet CS1200 - Manual (Page 11)

4- Then, from outside the building, slide a short chimney length (attached to the tee) through the wall
thimble. The chimney must extend at least 3 inches into the living space where it attaches to the
stove pipe.
5- You can now install the wall support. Simply slide the wall support up to the tee, ensuring that the
adapter on the support engages with the female coupler on the bottom of the tee. When the wall
support is level and properly positioned, you can use lag bolts to secure it into the wall studs. TO
complete the installation, install an insulated tee plug below the wall support.
6- You can start to add chimney sections. We recommend that you also use locking bands to secure
all connections. You will need to secure the chimney to the house using wall bands. Wall bands
wrap around the chimney and then attach to the wall. Install the first one 3 feet above the wall
support. Then, you will need another band for each 8 feet of chimney. Note: if your chimney
must be installed through your soffit, install a roof flashing above and finishing plate below
where the roof is cut. Consult the following section called “CEILING SUPPORT SYSTEM” for
more details.
11