Baumatic BHC700 - Manual (Page 13)

13
o
A neon above the safety lock button will light to show that the
safety lock feature has been switched on.
o
When the safety lock feature is activated, it will disable any of
the other buttons on the control panel.
o
To disable the safety lock feature, you should press the safety
lock button (5) for a few seconds. The safety lock neon will go
out and you are then able to adjust the power of any zone on
the hob top.
Safety cut-off
o
If one or more of the cooking zones are accidentally left on, a
safety cut off will activate after a certain period of time. The
length of time depends on the power level that a zone or zones
have been set on.
LEVEL TIME LIMIT (hours)
1 8
2 8
3 8
4 4
5 4
6 4
7 2
8 2
9 2
o
If more than one zone is operating when one of the zones
reaches its safety cut-off point, only the zone which has reached
its safety cut off point will switch off.
Hob guidelines
o
The first few times the hob top is used, it may give off an acrid,
burning smell. This smell will disappear completely with repeated
use.
o
The worktop is fitted with cooking areas of different diametre
and power.
o
The positions where the heat will radiate from are clearly marked
on the hob top. The saucepans must be positioned exactly on
these zones for efficient heating to occur. Pans should have the
same diametre as the cooking zone that they are being used on.
o
You should not use saucepans with rough bottoms, as this can
scratch the ceramic surface.