Baumatic BMC455TS - Manual (Page 15)

o
To disable the demonstration mode, press and hold the light
control button (1) for about 5 seconds. The appliance will then
be ready for use and you can proceed to set the time of day.
o
The microwave will only enter demonstration mode after the first
start up and after a power failure.
Setting the clock
o
To set the time of day, press and hold the timer button (24) for
about 3 seconds. The “:” will flash to indicate that the appliance
has entered the time setting mode.
o
Use the plus (19) and minus (20) buttons to set the current
time of day. When the correct time is displayed, release all
buttons and after a few seconds the “:” will stop flashing and the
time will be set.
15