BDI 8927 AVION - Manual (Page 3)

3
assembly instructions
bdiusa . com customerservice @ bdiusa . com
Completed base
assembly
Step 5
Install Wood Leg (I) at rear-center edge of cabinet bottom using two
(2) 1/4”-20 x 2” Machine Screws (E) and one of 4mm Hex Drivers
(B). Wood Leg (I) must straddle the rearmost Metal Rail (G), as
indicated in drawing.
NOTE: One (1) fastening
screw is installed from
cabinet interior. The other
fastening screw is installed
from cabinet exterior, near
back edge of cabinet, and
is most easily installed with
cabinet in upright position.
E
E
I
I
Step 6
Install both Back Panels (M) to the backside of the cabinet.
*Note: Velcro straps are included as wire management for your
convenience.
Optional Flat Panel TV Mount
This BDI cabinet is compatible with BDI’s Flat-
Panel TV Mount #9970
(sold separately) , with
the following features:
attaches easily to the back of the cabinet
•
accommodates most TVs up to 60”
•
swivel allows for rotating for optimal viewing
•
allows adjustable TV mounting height
•
accepts and route cables to and from the TV
•
F
or more information, visit www.bdiusa.com