BDI 8137 OLA - Manual (Page 2)

OLA
8137
ASSEMBLY INSTRUCTIONS
2
BDIUSA.COM [email protected]
Step 1
With the help of another person, position the cabinet on it's back.
Attach Metal Legs (F) to Cabinet (E) using Screws (C) and tighten with Hex Driver (A).
Attach Wood Leg (G) to Cabinet (E) using Screws (D) and tighten with Hex Driver (A).
Step 2
Turn Cabinet Over and Install Back Panels
With the help of another person, position the cabinet right side up.
CAUTION: Do Not Turn Cabinet Over on the Doors.
Install Back Panels (J) to the back side of the cabinet by inserting top edge in
upper channel, then tipping bottom edge forward and into lower channel.
Recommended
2-person Step
J
J
G
F
D
C
A
Recommended
2-person Step