BDI 6004 Sequel - Manual (Page 2)

2
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]
sequel
®
6004
wall
-
mounted desk
Step 3
Align the bottom of the Wall Attachment Rail (A) to the marked line and level. While holding
the leveled Wall Attachment Rail (A), allow the second person to outline the outermost holes
on the Wall Attachment Rail (A) and mark within each outline. Make two additional marks
within the slots of Wall Attachment Rail (A).
Step 2
The desk can be mounted at any height desired. For a sitting desk, mark the center of the
desk in its desired location 24.8 in/63 cm from the floor. For a standing desk, measure and
mark 4.5 in/11.4 cm from the bottom of your elbow at a 90º position.
TWO PERSON ASSEMBLY
A
Sitting 24.8 in/ 63 cm
Standing
4.5 in/ 11.4 cm