BDI Semblance modular system - Manual (Page 23)

3 2
LOW SEMBLANCE
4:
Using a level, mark a short horizontal
line no longer than 1.25 in / 31 mm that
inersects the U-Bracket’s center line.
6:
Attach the U-Bracket to the wall using the
appropriate attachment method illustrated
below
Wooden Beam: (W) Bracket
(D) Screws
Concrete/Brick: (X) Plastic Concrete Anchors
(W) Bracket
(D) Screws
A 1 /
4
" masonry drill bit and
Power Drill is required for
pilot holes.
Sheet Rock: (C) Drywall Anchors
(W) Bracket
(D) Screws
W
D
H
X
W
D
H
W
D
H
C
5:
Align the edge of the U-Bracket with the
existing wall marks and mark the hole
locations on the wall.