BDI 6015 Sequel - Manual (Page 2)

SEQUEL LATERAL FILE CABINET
6015 6016 6017
ASSEMBLY INSTRUCTIONS
2
BDIUSA.COM [email protected]
Step 2
Attach Base Legs
Attach Base Legs (L) to bottom of
Cabinet (K) with Machine Screws (B)
Black Color Screws and tighten with
4mm Hex L-Wrench (A).
Adjust Levelers as necessary.
Step 3
Attach Glass Top
Install Rubber Stem Bumpers (D) into
holes in rear of top of Cabinet (K).
Open top drawer halfway to access
screws to attach glass. Lower Glass
Top (J) onto Cabinet (K) with 2 glass
fittings towards the front. Attach Glass
Top (J) with 3 Machine Screws (C)
Chrome Color Screws and tighten with
4mm Hex L-Wrench (A).
DO NOT OVER-TIGHTEN.
Glass Top (J)
Front Edge
Glass Fittings
Glass Top (J)
Front Edge
4mm Hex L-Wrench (A)
Machine Screws (B)
Black Color Screws Base Leg (L)
Base Leg (L)
Machine Screws (B)
Black Color Screws
Bottom View
Rubber Stem
Bumpers (D)
D
Glass Fittings
on bottom