BDI 1106 Fin - Manual (Page 2)

2
assembly instructions
bdiusa . com customerservice @ bdiusa . com
Step 3
Install shelf.
Using the Phillips Screwdriver (B), install Glass Shelf (J) with Plastic
Screws (I) to the pre-installed shelf supports as shown below.
Step 4
Install table top.
Using the 2mm Hex Driver (C) and Set Screw (K), install Table Top (M)
as shown below.
J
B
I
Step 3 - Install Shelf
Using the Phillips screwdriver (A), install glass shelf with Plastics Screws (G) as shown below.
Step 4 - Using the small hex wrench (B) and set screw (D), install table top as shown below.
C K
M
H