BDI 9760 Aspect User Manual
Page 3
Step 1
4.
4. Install UMB mounting plate to the top of the
column using the part C, and M5 allen wrench.
2.
Install shelf bracket near the center of the column
area, near the center cable management hole. Use part
B, and M4 allen wrench to attach the shelf bracket.
3.
Install glass shelf to the shelf bracket using part
D, lock washer and M5 allen wrench.
1.
Install Column. Insert the column into the top opening
of the base. By laying these parts on their side, install
the ballast to the bottom of the base using the part A
and the M8 allen wrench.
Wire Management. Once the unit is assembled, and
the TV is ready for mounting, guide all wires connecting
from the component to the TV (including power cords)
through any of the three cable management holes
provided.
Unpack and identify parts listed on the previous page.
The assembly workspace should be a non-marring surface such as carpet. If any parts are missing or damaged contact BDI
Customer Service at: [email protected]
A
B x 4
D x 2
C x 2