BDI 8157 Cirrus - Manual (Page 2)

2
assembly instructions
bdiusa . com customerservice @ bdiusa . com
3
(K) at Front Rail (H), and using Washers (J) and ¼-20 x 3-1/2”
Machine Screws (L) at Rear Rail (G) and provided Hex Driver (B).
L
J
J
C
K
Step 3
Fasten Base Assembly to Assembled Cabinet (I)
After inserting Dowel Pins (C) at each of the four corners of the Base
Assembly, install Base Assembly to Assembled Cabinet (I) with Front
Rail (H) oriented towards cabinet front (see drawing).
Fasten into place using Washers (J) and ¼-20 x 2” Machine Screws
Step 4
Install Center Leg
Install Center Leg (N) to cabinet’s bottom panel using ¼-20 x 1-¼”
Machine Screw (M) and tighten with provided Hex Driver (B).
M
M
N
M
N
NOTE:
Levelers are present at
the front and rear underside
of each Leg Assembly. Each
Leveler is manually adjustable
by hand-turning to extend or
retract to the desired position.
Such adjustment will help offset
uneven flooring and/or will
prevent the cabinet from
rolling.