BDI 9621 Deploy - Manual (Page 2)

2
assembly instructions
bdiusa . com customerservice @ bdiusa . com
Step 4
Install back panel
Install Back Panel (C) using the Back Panel Shelf Pin (D) and
Allen Wrench (L1). Install Glass Shelf Pin (E) to desired height
location on Back Panel (C) using a flat head screw driver.
Step 5
Installing the Shelf Brackets and Rubber Bumper Inserts
Install Shelf Pin (F) using Allen Wrench (L1). Install Shelf
Brackets (G) on previously installed Shelf Pin (F). Once Shelf
Brackets (G) are in place, install Rubber Bumper Inserts (H) in
all visible hole locations.
E x 6
H x 11
D x 2
F x 4