Drolet ESCAPE 1800 DB03115 - Manual (Page 6)

Some Escape 1800 models require a special assembly. This assembly must be performed before
positioning the appliance. Please note that only DB03115 and DB03116 models require this
additional assembly.
1.1.1 Ash drawer assembly for DB03115 model
Before positioning the wood stove, it is suggested to assemble the ash drawer on DB03115 model as
shown below :
1.1.2 Legs and ash drawer assembly for DB03116 model
Before positioning the wood stove, it is suggested to perform the following steps for the legs and
ash drawer assembly for DB03116 model. To do so, remove the freight supports (A) as shown
below. You can dispose of the bolts and freight supports.