BECKHOFF CU8850-0000 - Manual (Page 9)

Installation Instructions
Mounting/ Unmounting
The CU8850 can be snapped onto a 35 mm mounting rail conforms to
EN 50022.
Mounting the
USB-Extender-Rx Just push the unit on the lower side under the rail (fig. 1) and snap in the
upper side (fig. 2) as shown below:
Unmounting the
USB-Extender-Rx To release the CU8850 USB-Extender-Rx from the mounting rail push up
the unit (fig. 1) and pull off the device from the rail (fig. 2):
CU8850-0000 7