Hyundai H-CDM8033 - Manual (Page 14)

14
Function Mask DPI- Mask all
Press the sound select button for 2 seconds.
Press the SEL button to cycle through to “Mask DPI”.
Rotate the encoder volume to toggle between MASK DPI and MASK ALL mode.
Leave the unit idle for the mode to take effect.
During MASK DPI mode the unit will mask only the AF which has different PI, this is the default mode. During MASK ALL mode
the unit will mask the AF which has different PI and no RDS signal with high field strength.
Retune S / L – Short / Long function
This function is to set the initial duration of automatic TA Search.
Press and hold the sound select button for 2 seconds until “TA SEEK” is shown on the LCD.
Press the SEL button to cycle through the menu selections until “RETUNE_S” is shown.
Use the VOL+ /- button to choose “RETUNE_S” or “RETUNE_L”.
The default is “RETUNE_S”.