Digi 90000278_B - Manual (Page 10)

10 Digi One EM Hardware Reference
Connectors: Ethernet Interface (P1)
The Digi One EM Ethernet connector is an eight-wire, RJ-45
jack meeting the requirements of ISO 8877 for 10/100Base-
T. The following figure helps you locate pins and the table
helps you identify which signal uses each pin.
Pin Signal Name
1 TxD+ (Transmit Data)
2 TxD- (Transmit Data)
3 RxD+ (Receive Data)
4 Not used
5 Not used
6 RxD- (Receive Data)
7 Not used
8 Not used