BECKHOFF C9900-U3x0 - Manual (Page 13)

Installing the UPS
Installing the UPS
Two different circuit boards can be used to drive the UPS: the CP-Link card
CP9030, or the interface card C1230S. See appendix technical data for
detailed information.
The UPS can be configured under Windows NT/2000/XP with TwinCAT CP
or under Windows 95/98/NT with the ActiveX component CP9090-S100.
Configuration under TwinCAT
Configure the CP link card CP9030
Start the TwinCAT System Manager and click with the right mouse button
onto I/O devices. Choose append device.
Choose the I/O device Beckhoff Panel-Link (CP9030)
10 C9900-U3x0