BECKHOFF EL9820 Evaluation Kits - Manual (Page 4)

Foreword
2 EL9820
1 Foreword
1.1 Notes on the documentation
This documentation is only intended for the use of trained specialists in control and automation engineer-
ing who are familiar with the applicable national standards. It is essential that the following notes and
explanations are followed when installing and commissioning these components.
1.1.1 Liability conditions
The responsible staff must ensure that the application or use of the products described satisfy all the re-
quirements for safety, including all the relevant laws, regulations, guidelines and standards.
The documentation has been prepared with care. The products described are, however, constantly under
development. For this reason, the documentation may not always be have been fully checked for consis-
tency with the performance data, standards or other characteristics described. None of the statements in
this manual represent a guarantee for as set out in § 443 of the German Civil Code or a statement about
the assumed use according to the contract as set out in § 434 para. 1 clause 1 no. 1 of the German Civil
Code. In the event that it contains technical or editorial errors, we retain the right to make alterations at
any time and without warning. No claims for the modification of products that have already been supplied
may be made on the basis of the data, diagrams and descriptions in this documentation.
1.1.2 Delivery conditions
In addition, the general delivery conditions of the company Beckhoff Automation GmbH and the EtherCAT
Evaluation Kit Licence Agreement apply.
1.1.3 Copyright
©
This manual is copyrighted. Any reproduction or third party use of this publication, whether in whole or
in part, without the written permission of Beckhoff Automation GmbH, is forbidden.