BECKHOFF DK9122-0311-0026 - Manual (Page 6)

Industrial PC
Monitoring and diagnosis
Application Note DK9122-0311-0026
This publication contains statements about the suitability of our products for certain areas of application. These statements are based on typical features of our products. The examp-
les shown in this publication are for demonstration purposes only. The information provided herein should not be regarded as specific operation characteristics. It is incumbent on the
customer to check and decide whether a product is suit-able for use in a particular application. We do not give any warranty that the source code which is made available with this
publication is complete or accurate. This publication may be changed at any time with-out prior notice. No liability is assumed for errors and/or omissions. Our products are described
in detail in our data sheets and documentations. Product-specific warnings and cautions must be observed. For the latest version of our data sheets and documentations please visit
our website (www.beckhoff.com).
© Beckhoff Automation GmbH, March 2011
The reproduction, distribution and utilisation of this document as well as the communication of its contents to others without express authorisation is prohibited. Offenders will be
held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.
– Embedded PC CX5000 www.beckhoff.com/CX000
– Control cabinet Industrial PC with Intel
® Atom ™ www.beckhoff.com/C691
– The compact Industrial PC with mounting arm www.beckhoff.com/CP77xx
– The slimline built-in Industrial PC with 3½-inch motherboard www.beckhoff.com/CP62xx
– Reference of USV software components
http://infosys.beckhoff.com/content/1033/tcplclibsups/html/tcplclibsups_overview.htm
New Automation Technology Beckhoff 6