Besa Lighting Renfro (Flush Mount) User Manual

Ceiling fixture installation guide

Advertising
background image

6695 Taylor Rd. Blacklick, OH 43004

www.besalighting.com

CEILING FIXTURE INSTALLATION GUIDE

Models using Renfro Series (T5 Circline Base 120V)

Renfro 16, Rev.1 11-12

Use With

these Models:
• Renfro 16

Caution: Turn off power to electrical box before installing

All electrical connections and the installation of this fixture must be in agreement with local codes,

ordinances or the NEC (National Electric Code) or CEC (Canadian Electrical Code).

Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

1. Carefully unpack parts. Install Mounting Bracket (A) onto Outlet box and secure with

Machine Screws (B).

2. Connect the house supply ground wire to the Ground Screw (C) on the Mounting Bracket.

3.

Connect the electrical leads from the fixture to the house supply wires, black to black and

white to white, and secure with wirenuts provided (D).

4. Thread Washer (E) and Hex Nut (F) onto the Threaded Nipple (G). Leave approximately 1 1/2” of

Threaded Nipple below the Hex Nut.

5. Align the openings in Fixture Pan (H) and Mounting Bracket (A) and install the Threaded Nipple to

secure the Fixture Pan to the Mounting Bracket.

6. Install lamp. Do not exceed the wattage marked, as that could cause fixture to overheat.

7. Install Glass Diffuser (J) by aligning glass opening with Threaded Nipple (G), then screw on

Decorative Cap (I).

8. Restore power.

NOTE:

Glass Shade is for instructional

purposes. Actual Glass Shade

may vary in size and shape.

A

D

C

B

E
F

G

I

H

J

1 1/2”

Advertising
This manual is related to the following products:
Table of contents