Beurer GS 39 - Manual (Page 11)

11
enGLISH
Dear Customer,
Thank you for choosing one of our products. Our name stands for high-quality, thoroughly tested
products for the applications in the areas of heat, weight, blood pressure, body temperature, pulse,
gentle therapy, massage and air.
Please read these instructions for use carefully and keep them for later use, be sure to make them
accessible to other users and observe the information they contain.
Best regards,
Your Beurer Team
1. Interesting facts
Weighing correctly
If possible, always weigh yourself at the same time of day (ideally in the morning), after going to the
toilet, on an empty stomach and without clothes to achieve comparable results.
2. Important notes – keep for later use!
Caution – For your safety
– Attention! Do not step onto the scale with wet feet or when the scale’s surface is damp
-danger of slipping!
– You should protect the scale against impacts, moisture, dust, chemicals, major temperature fluc-
tuations and keep it away from heat sources (ovens, radiators).
– Do not stand on the outer edge to one side of the scale otherwise it may tip!
– Repairs may only be performed by Customer Service or authorized dealers. However, always
check the batteries and replace them if necessary prior to making a complaint.
– All scales comply with EC Directive 2004/108 + supplements. Should you still have questions
regarding the use of our products, please contact your dealer or Customer Service.
– The scale should occasionally be cleaned with a damp cloth. Do not use aggressive cleaning
agents and never submerge the scale.
– The device is only for private use and is not intended for medical or commercial purposes.
– Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical
and Electronic Equipment). If you have any queries, please contact the appropriate local
authorities.
3. Voice function
The device has 5 language settings:
German (DE), French (FR), English (GB), Spanish (ES) and Russian (RUS)
The device is set to German when supplied to the customer.
To change the language, switch the scale on as described in the “4.2 Measuring weight” chapter
and wait until " 0.0" is shown on the display. Now press the middle button, "Language", on the back
of the scale, until the desired language is announced.
Volume control:
You can adjust the volume of the language function as you wish, or switch it off by repeatedly pres-
sing the " +/-" button on the back of the scale.
note: Language off (no beep) means that voice output is not selected and the measurement value
will not be announced.
!