Beurer BY 76 - Manual (Page 12)

12
9. Disposal
In the interests of the environment, the device cannot be disposed of in normal household waste at
the end of its service life. Disposal can take place via respective collection points in your country.
Follow local regulations when disposing of the materials.
Dispose of the device in accordance with the EC directive on old electric and electronic
devices – WEEE (Waste Electrical and Electronic Equipment).
If you have queries, contact the appropriate local authorities.
10. Technical data
Supply voltage: 220 - 240 V ~ / 50/60 Hz
Output: 500 watts
11. What if there are problems?
Fault Cause Action
The device does not switch on
after the cable is plugged in. No electricity Check that the plug is properly
plugged in.
The device switches itself off after
the warming up phase, there are
no more displays. No water in the
steriliser Unplug the device, allow it to cool
down, then fill it with 120 ml water
and start the programme as de-
scribed in the instructions.
The device switches itself off
midway through the process, and
there are no more displays. Too little water in the
steriliser
No LED display Mains plug not (prop-
erly) plugged in or
faulty device Check that the mains plug is (prop-
erly) plugged in. If there is still no
display, switch the device off, unplug
it and return the device to the retailer.