Dukane 8913H - Manual (Page 8)

8
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY PAGE UP VOLUME
DOWN ࡯
ON
OFF
㧗 FREEZE
Turning off the power
.
Press the STANDBY/ON button on the projector
or the remote control.
The message "Power off?" will appear on the
screen for about 5 seconds.
2.
Press the STANDBY/ON button again while the
message appears.
The projector lamp will go off, and the POWER
indicator will begin blinking in orange. Then the
POWER indicator will stop blinking and light in
steady orange when the lamp cooling is complete.
3.
Make sure that the POWER indicator lights in
steady orange, and set the power switch to the
OFF position (marked “O”). Attach the lens cover.
Do not turn the projector on for about 10 minutes
or more after turning it off. Turning the projector on
again too soon could shorten the lifetime of some
consumable parts of the projector.
WARNING ►Do not touch around the lamp cover and the exhaust vents
during use or just after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.
NOTE • Please power off the projector after any connected devices are powered off.
• This projector has the AUTO OFF function that can make the projector turn off
automatically. For more information, please see the “Operating Guide” in the CD.
STANDBY/ON button
POWER indicator
Power switch