Dakota Digital MCL-2011(-R) - Manual (Page 2)

MAN# 650369
•
Remove the dash
•
Unclip and unplug the factory gauge
•
Insure that the rubber gasket is still in the dash or
remove from factory gauge and place back on dash
•
Insert new gauge from front of dash
•
Plug in and turn on so you can straighten
the gauge in the dash
•
Use supplied L-brackets along with the 8-32 screws
and lock washers to secure the gauge
•
Reinstall the dash
Wiring
The gauge is a direct plug in on 2011 or newer Softail and 2012 or newer Dyna. The only wiring, which is optional,
is for the auxiliary pressure/temp gauges if you choose.
WIRING COLOR CODE FOR AUXILARY TEMPERATURE OR PRESSURE GAUGE:
MCL-2011
Function
BLUE SEN-1043 or SEN-1044 temperature sensor signal
BLACK SEN-1044 temperature sensor ground
WHITE/RED SEN-1039 pressure sensor RED wire
GRAY SEN-1039 pressure sensor WHITE wire
BLACK SEN-1039 pressure sensor BLACK wire
POWER
Constant battery power is supplied by the stock harness.
GROUND
Ground is supplied by the stock harness.