Blu Bathworks LSeat-001 - Manual (Page 4)

2014-10
1 866 907 0122 blubathworks.com
3
1
Fixing the Hinge Anchor
Fitting the Seat
• Place the Top Fix Inserts into the fixing holes. Insert the
screws within the Hinge Anchors as shown and begin
to tighten the screws until they are loosely secured to
allow for adjustment of the seat.
• This toilet seat is designed for quick and easy removal when cleaning
the toilet. To activate the quick release lift the lid, seat up and press the
button in the centre of the hinges and lift.
• To replace the seat, align the sockets with the pin and firmly press into
position.
• LSeat-002 is designed to activate the quick release with NO BUTTON.
To release, lift lid and seat up, then pull up.
Quick-Release Mechanism
3
• Insert the expansion
rubbers/plastic inserts
into the hinge holes of
the toilet. • Make sure round
rubber gasket is
underneath hinge.
1a 1b
2 2a 2b 2c