Blu Bathworks TSP211 User Manual
Page 3
2013-07
1 866 907 0122 blubathworks.com
®
2
CARTRIDGE CHANGE
Through years of use impurities and limescale could damage the cartridge. To replace it, refer-
ence the following instruction.
•
Shut off water supply to both inlets
•
Remove the control lever (1), remove the screw (2), take off the control handle (3) and pull
out the cup (4).
•
Pay attention not to lose the O-ring (5).
•
Unscrew the flange (6) using 30mm/1
1
/
6
” spanner. Remove the cartridge (7).
•
Before re-assembling cartridge (7) clean its housing with wet cloth.
•
Re-assembling the flange (6).
•
Place the O-ring (5) and re-fit the cap (4).
•
Re-fit the control knob (3) and fix it with the grub screw (2).
•
Re-fit the lever (1).
IMPORTANT
In case of reduction of flow rate, dismantle the aerator and clean the filter inside or change it.