Blu Bathworks TEE300 - Manual (Page 12)

2015-05
1 866 907 0122 blubathworks.com
Step 11 Step 12
Step 13
Re-insert the outlet connectors retaining bolt.
Connect the data cable from the on-off
control to the ‘TLI’ port in the control box.
Attach the supplied NPT adaptor
pipework to the outlet connectors.
Make a note of which pipe goes to which outlet.
Note: Make sure that the pipework is perpendicular to
the control box so that there is no strain on the fittings,
use pipe clips as required.
Run a pipe from the mixed water outlet on the control
box through the wall to the proposed position of the
shower hose outlet etc.
15VB
attery
WLAN
ValveC
ontrolle
rD ual Whe
el
Display
15V Battery
WLAN
Valve
Controlle
r Dual
Wheel
Display
15V Battery
WLAN
Valve
Controlle
r Dual
Wheel
Display
WLAN
Valve
Controlle
r Dual Whee
l
Display