Bluelab Guardian Monitor Connect Manual - Manual (Page 17)

English
17
Bluelab Probe Care Kit - pH and Conductivity
The instrument is only as accurate as the probe is clean!
Probe cleaning is one of the most important parts of owning
and operating any Bluelab meter, monitor or controller.
If the probe is contaminated (dirty) it affects the accuracy of the
reading displayed.
The kit contains instructions and all the tools you need to clean the
Guardian Monitor Connect probes.
pH probes do not last forever. They age
through normal use and will eventually fail.
To ensure you receive a long life from your pH
probe, please read the instructions provided with it.
When the time comes to replace your Bluelab
pH Probe all you have to do is order a replacement from your supplier!
Bluelab pH Probe replacement
The Bluelab pH Probe is the only part of the
Bluelab pH Meter that requires replacing.
Bluelab pH Probe KCl Storage Solution
The perfect solution to store and hydrate your Bluelab pH products.
Bluelab pH Probe KCl Storage Solution is designed to increase response
time and maximize the life of Bluelab pH pens and pH probes.
For best results, use the KCl solution to store the pH pen/probe after use and
hydrate monthly. Instructions are on the label of the bottle.
Extend the wireless range by positioning a range
extender between your Bluelab Connect devices
and your connect stick.
Using the Bluelab Connect Range Extender requires you
to already have a connect stick and one or more Bluelab
Connect enabled devices.
Bluelab Connect Range Extender
A Bluelab Connect Range Extender boosts the
data signal strength.
One Connect Stick will receive data from multiple
Bluelab Connect devices.
You can add other Bluelab Connect devices to your
Connect Software at the click of a button.
Bluelab Connect Stick
The Bluelab Connect Stick receives wireless data from
one or more Bluelab connect devices. Your data can then
be logged to your local computer and/or to the cloud.