Bolide SVR9000D - Manual (Page 25)

User Manual
24
When selecting Static from the Type, user can directly input IP address, Subnet Mask, Gateway and DNS
shown as below picture 5-29.
7. Click [Apply] button
8. Now you could remotely visit the DVR via IP
http: // public net IP: web port (such as: 8080)
http: //intranet IP: web port (such as: 8080 - only use for Intranet)
5.3.4.2 Router’s Port Forwarding
Port forwarding is required when you want to access the DVR connected to the router from outside of the
router’s network.
If PPPoE is selected, port forwarding is not required.
Friendly Reminder: The router’s port forwarding interface may be different, however, when entering into
virtual server, user will always need forward port (range: 1025~65535) of router to IP address of DVR allocated
or automatically captured, and select [All] or [Both] in corresponding protocol column and save the above
setting.
Above steps may differ from the router device depending on the manufacturer.
When selecting PPPoE form the Type, user can
input user name and password provided by ISP and set
Media and Web port. And now you can visit your remote
DVR by using the IP address captured after registering a
domain name and web port and connect to your DVR via
public network.
1. Set your net type to Static;
2. Set media port number (such as 9000), and the port need
to be forwarded to a router.
3. Input web port number (such as 8080), and the port need
to be forwarded to a router;
4. Input a specified IP address to [IP address] column;
5. The Subnet Mask, gateway and DNS server should be
consistent with your router’s configurations.
6. Input DNS address. Please check router firstly. The setting
should be consistent with router’s
1. Input router’s IP address from IE-based browser to open
the Router configuration interface shown as Picture 5-31;
2. Click [Transmittal rule] option to take you to the port
forwarding instructions for your router;
3. The DVR IP address for the intranet should be
<192.168.1.101>, you should forward server port and web
port to this IP address respectively.
4. Now user can visit the DVR remotely.
Picture 5-29
Picture 5-30
Picture 5-31