Brinly PA-40 BH Plug Aerator - Manual (Page 7)

L-1762 Rev. E 7
17
2
32
29
7
21
32
18
2
29
21
7
Hex Bolt (21) Goes
Between The Two
Carriage Bolts (29)
(20)
Hex Head Bolt, 5/16" x 3/4"
Qty. 4 for PA-40 BH
Qty. 7 for PA-48 BH
(21)
Hex Head Bolt, 5/16" x 1-1/4"
Qty. 1
(32)
Nylon Lock Nut, 5/16"
Qty. 4 for PA-40 BH
Qty. 7 for PA-48 BH
(32)
Nylon Lock Nut, 5/16"
Qty. 3
(29)
Carriage Bolt, 5/16" x 2-1/4"
Qty. 2
(17)
Hitch Pin
Qty. 1
(18)
Hairpin Cotter, 1/8"
Qty. 1
3a. Assemble Mount Brackets (31) to Tray (6) as
shown. Insert the Bolts from the topside of the
Tray. Loosely tighten with Nylon Lock Nuts (32).
IMPORTANT Tray with label faces forward.
For PA-48 BH model install Center Plate (33)
to Tray (6) as shown. Insert the Bolts from the
topside of the Tray. Loosely tighten with Nylon
Lock Nuts (32).
4a. Assemble the Clevis (2) to Tow bars (7) as
shown. Install Carriage Bolts (29) and Nylon
Lock Nuts (32) finger tight. Next install Hex Bolt
(21) and Nylon Lock Nut (32) finger tight.
4b. Insert Hitch Pin (17) in Clevis (2) and secure
with Hairpin Cotter (18). Grasp Hitch Pin and pull
forward.
4c. Tighten securely all fasteners installed in step
4a. Then tighten securely all hardware installed
in Steps 2 through 3.
Figure 3
Figure 4
TOW BAR ASSEMBLY
CLEVIS ASSEMBLY
ASSEMBLY
6
7
20
20
32
32
32
32
33
31
31