Brinly DK-422LX Dethatcher Kit for STS-426LXH - Manual (Page 3)

L-1660-D 3
Tools Required for Assembly:
* 1/2” wrench (2)
* Pair slip joint pliers
* Level
* Tape Measure
IMPORTANT!
This unit mounts to your STS-422 LX or LPSTS-42JD 42” Lawn
Sweeper. Make sure your Sweeper Hitch Clevis Assembly is
assembled as called out in its Owner’s Manual (Page 7, Fig.
4&5).
IMPORTANT: To insure proper adjustment of Dethatcher
Kit, the Sweeper Upper Frame Assembly must be Parallel
to Ground.
With your Tractor/Riding Mower on a flat, level surface, attach
the Sweeper and adjust the Lift Handle of Sweeper to position
Brushes approximately 1” off ground. Using a Level, check
Upper Frame Assembly for “level” FRONT TO BACK. Adjust
the Hitch Clevis Assembly of Sweeper UP or DOWN to
maintain”level” position of Frame. (Refer to Page. 6, Fig 6 of
Sweeper Manual).
HARDWARE REFERENCE
Hardware Bag “A” (Part No. Z1689)
10
(1) Carriage Bolt, 5/16” x 1”
9
(13) Carriage Bolt, 5/16” x 3/4”
11
(2) Hex Bolt, 5/16” x 3/4”
7
(12) Wire Tine
not to scale
13
(16) 5/16” Nylon Lock Nut
12
(3) 5/16” Flat Washer
16
(12) Special Washer (.390 i.d)
14
(2) Hairpin Cotter
15
(1) Flat Grip (5/16” x 4”)
not to scale
8
(1) Pivot Bracket
not to scale
Hardware Bag “B” (Part No. Z1688)
This page is for reference use only
All items shown full size unless otherwise
specific.