Broadata Communications 1700 Series - Manual (Page 6)

BCI 1700 User’s Manual
Fiber Optic Digital Video/Audio Transport System
Broadata Technical Support, [email protected] 7
2.0 SETUP
The BCI 1700 Series units are used in pairs. In a unidirectional
application, a 1700 transmitter (1700-T) is located at the near-end and
connected through one fiber to a 1700 receiver (1700-R) located at the
far-end. In a bi-directional application, one 1700 transceiver unit is located
at the near end and connected through two optical fibers to identical
1700 transceiver located at the far end of the link. Each unit provides a
separate electrical interface connector for the Serial Digital Video data
signals. Connections are one to one between both units. Figure 2-1
depicts a typical installation.
Figure 2-1
1700 Setup