BSS Audio BLU-6 Install Guide - Manual (Page 2)

2
v1.0 JN 09/2004
Useful Information
We have written this guide with the aim of helping installers and sound engineers alike to
get the most out of the BLU-6. We recommend that you read this manual, particularly the
section on mechanical installation, before attempting to operate the unit.
We welcome any comments or questions regarding the BLU-6 or other BSS products, and
you may contact us at the address or world wide web sites given overleaf.
Installation
The BLU-6 is a wall mounted controller which, with the rotary switch, can be used to
control a source selector or parameter preset bar in the main system, and with the up and
down buttons alter the level of a gain object, for example.
A sticker sheet is provided with the unit, which should cover most locational
requirements, The sheet covers 4 languages: English, French, German and Spanish.
The unit is mounted into a standard UK light switch wall box; and dimensions of the unit
are shown below. The pitch between the fi xing hole centres is 60mm. Mounting screws
are provided.
Wiring
Wiring follows the standard control input wiring for a BLU-16, 32, 80, shown below. The
printing on the PCB also shows the correct wiring convention. The cable used should be
regular audio cable, or any quality shielded twin-core cable.
London
Soundweb TM
BLU-6
wall controller
through wall
to Soundweb
London units