BUG-O Systems Programmable Shape Machine - Manual (Page 4)

4
5..............Unpacking Your Programmable Shape Machine Kit
6..............Description, Operation
7,9...........Pendant Controls
10............Shape Programming
11 ............Auxiliary Modes
12............Set % Speed, Fraction of Set Speed
13............Example: Obround Shape
14............Repeat Function Example
15............Segment Types
16,17.......Data Entry Required for Programming
18............Panel Controls
19............Rail Installation
20............BUG-6150 / Shape Machine / Exploded View
21............BUG-6150 / Shape Machine / Parts List
22............BUG-6170 / Cover Assembly / Exploded View
23............BUG-6170 / Cover Assembly / Parts List
24............BUG-6160 / Base Assembly / Exploded View
25............BUG-6160 / Base Assembly / Parts List
26............Programmable Shape Machine / Wiring Diagram
27............Programmable Shape Machine / Electrical Component Chart
28............Wiring Diagram / Pendant Cable
29............Operation Checklist and Troubleshooting Guide
30............Programmed Diagnostics for Shape Machine
31............Warranty
TaBLE OF CONTENTS PaGE
PROGRaMMaBLE SHaPE MaCHINE
INSTRUCTIONS aNd PaRTS MaNUaL
PaGE
------CaUTION------
dO NOT LEaVE EQUIPMENT
UNaTTENdEd WITH POWER ON.
BE CERTaIN POWER IS OFF WHEN
NOT IN USE!