BUG-O Systems SE-2PTD - Manual (Page 9)

9
PENDANT CONTROL
This is the Pendant Control with keypad and display, which plugs into the Pendant Control
Connection on the control panel.
ALPHA KEYS: Press Keys A, B, C, D, or E for the function desired, as described in the
programming section of this manual.
DIGIT KEYS: Use the digit keys to enter pipe diameters or dimensions.
ENTER: Push the enter button to store the numeric value entered.
BACKSPACE: The backspace key removes the last digit keyed in before pushing the enter
button, if a correction is required.