BUG-O Systems Standalone CDS Linear Weavers - Manual (Page 5)

5
CDS-6350 STAND ALONE LINEAR WEAVER
INTRODUCTION
The Stand Alone CDS Linear Weaver is a self contained machine used for weave welding.
It can be installed as part of a welding fixture, or mounted on a drive carriage running on a
track.
The CDS Linear Weaver is particularly useful for weaving v-groove welds in a butt joint.
The Weaver box is attached on the end of an adjustable rack, held by a rackholder that
can be mounted on the front of the drive carriage, or directly on the welding fixture.
FEATURES
• High torque, low inertia motor for precise starts and stops.
• Heavy duty planetary gear box with powerful output shaft.
• Uniform linear motion with independent control of right and left dwell times.
• Closed loop speed control for adjustable and repeatable control of critical welding
parameters.
• Closed loop position control to prevent drift from the center position.
• Gun mounting group with adjustable linkage for accurate positioning of the gun.
• Weld Contactor ON/OFF switch.