D-Link DCS-1000 - Manual (Page 15)

14
Camera Name:
This field is used for entering a descriptive name for the device.
The default setting for the Camera Name is CS-xxxxxx, where xxxxxx is the
last six digit of the MAC Address. The maximum length is 32 (Printable
ASCII).
Location:
This field is used for entering a descriptive name for the location used by
DCS-1000.
Admin:
This field is used for entering the Administrator ID along with the password to
access the System Administration settings. Be sure to enter the password
twice to confirm the details once in the Admin Password field and again in the
Confirm Password field.
The default setting for Admin is blank space (Null String) you need to key in
the Admin ID with a maximum length of 12 (Printable ASCII) characters and
enter the Admin Password with a maximum length of 8 (Printable ASCII)
characters.
It is highly recommended to set the Admin ID and Admin Password as soon as
possible to enable security option for DCS-1000 to function.
IP Assignment :
There are two options to select from the IP Assignment either Manually
Assign or Assign Automatically Using.
Manually Assign
You can click “Manually Assign” and directly enter the IP address.
Important Information
Access to DCS-1000 is done through assigning a proper IP address. Please
make sure to use a vacant IP address when you assign the IP address for DCS-
1000. This will prevent errors from occurring if the IP address is overlapped.