Kor940tt – Campomatic KOR940T User Manual

Page 9

Advertising

kor940tt

1. SET STAGE 1:

Follow steps 1 and 2 in “One-stage

Cooking”.

DO NOT TOUCH START PAD.

2. SET STAGE 2:

Touch MEMORY pad then enter proper cooking time and (lower) power level. (Most 2-stage recipes use lower power for

second stage.)

3. Touch START pad.

NOTE:

·The respective lights will come on to indicate which stage the oven is operating in. After total time has elapsed, 3 beeps

sound. After a cooking or defrosting program has completed, the oven will automatically continue to sound three beeps every two

minutes until the door is opened or the CANCEL pad is touched.

PRE-SET

Suppose you want to set the oven to start-up at 2 o’clock.

Step :

1. Touch PRE-SET pad.

2. Touch numeral pads 2.0.0.

3. Set the cooking programs.

4.Touch START pad.

NOTE:

Be sure the time of day clock is set at the correct time before programming PRE-SET.

EXPRESS

Use this feature to program the oven for 4 popular microwave timings.

With each touch of the EXPRESS pad you can program the oven for :

15 seconds ………TOUCH ONCE

30 seconds……….TOUCH TWICE

1 minute……….TOUCH 3 TIMES

2 minutes………TOUCH 4 TIMES

The oven will operate at HIGH power (100% power output) for EXPRESS cooking program.

Suppose you want to set the oven to cook for 1 minute at 100% by using the feature:

Step : 1. Touch the EXPRESS pad 3 times then “1:00” will appear in the display.

2. Touch START pad.

SETTING “JET DEFROST”

1. Touch JET DEFROST pad.

2. Enter desired defrosting time by touching correct number pads. Digital timer sets minutes and seconds from left to right so a

single digit can be set (5 for 5 seconds) or up to 4 digits (2405 for 24 minutes 5 seconds).

3. Touch START pad.

SETTING “WEIGHT DEFROST”

Suppose you want to defrost 600g shrimp.

1. Touch WEIGHT DEFROST pad 3 times. “d3” will appear in the display.

2. Touch number pads 6.0.0.

3. Touch START pad.

NOTE: The maximum allowable weight for each category is shown below.

FOOD