Caple F Series Chimney - Manual (Page 6)

Page 6 of 7
F SERIES CHIMNEYS
Replacing the lamp
1. Disconnect the hood from the electricity.
2. Remove the grease filters (Fig. 2).
3. Illumination: always replace burnt-out lamps with 40-Watt max. (E14) (Fig. 5) -20
Watt max. (Fig. 6) and 11-Watt max. (Fig. 7).
4. Refit the metal grease filters.
5. Before calling for repair service because the hood fails to light up, make sure the
bulbs are screwed in tightly.
FITTING
INSTRUCTIONS FOR ISLAND EXTRACTORS