Caple WC6216 - Manual (Page 8)

8
1. Incline the wine cabinet with 45 degrees, take out right lower hinge’s screws with screwdriver
(Fig.1)
2. Level the wine cabinet, Hold the door and take out right upper hinge’s screws with screwdriver,
then take out the door and rotate the door 180 degrees (Fig.2 & Fig.3 & Fig.4)
3. Take off the decorated nail from left upper side, then fit the door with screws, then fit the
decorated nail to right side of A location. (see Fig.5& Fig.6)
Installation specifications for built-in purposes
1. After installed wine cellar into cabinet, please adjust limited block (a) close to cabinet (b)