Caple C5210 - Manual (Page 24)

24
Burners
They can be removed and washed only
with soapy water.
Detergents can be used but must not be
abrasive or corrosive.
Do not use abrasive sponges or pads.
Do not put in dishwasher.
After each cleaning, make sure that the
burner-caps, as well as the burners,
have been well wiped off and COR-
RECTLY POSITIONED.
It is essential to check that the burner
flame distributor “F” and the cap “C” has
been correctly positioned (see fig. 8.1) -
failure to do so can cause serious prob-
lems.
Check that the electrode “S” (fig. 8.1) is
always clean to ensure trouble-free
sparking.
Note:
The electrode “S” must be very carefully
cleaned.
To avoid damage to the electric ignition
do not use it when the burners are not in
place.
F
S
C
Fig. 8.1