Burners, Correct replacement of the burners – Caple CR9105 User Manual
Page 32
![background image](/files/777186/content/doc032.png)
32
Burners
They can be removed and washed with soapy water only.
They will remain always perfect if cleaned with products used for silverware.
After cleaning or wash, check that burner-caps and burner-heads are dry before plac-
ing them in the respective housings.
Note: To avoid damage to the electric ignition do not use it when the burners are
not in place.
Fig. 8.2
Fig. 8.1
S
F
C
T
Correct replacement of the burners
It is very important to check that the burner flame distributor F and the cap C has
been correctly positioned (see figs. 8.1, 8.2) - failure to do so can cause a poor burn-
er flame and/or damage to the burner and hob.
Check that the electrode S (figs. 8.1, 8.3) is always clean to ensure trouble-free
sparking.
Check that the probe T (figs. 8.1, 8.3) next to each burner is always clean to ensure
correct operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.