CHIAYO COACH PRO 500 - Manual (Page 7)

ISO 9001｜ISO 14001｜OHSAS 18001
-6-
CHANNEL setting (SQ-1016V｜1016)
Please use the attached small screw driver to set the channel.
VOLUME adjusting (SQ-1016V)
Please slide the wheel  to adjust the volume.
Other settings (SQ-5016)
1. Channel setting
Use UP or DOWN button to go to the CHANNEL｜FREQUENCY page.
The cursor will flash to allow changes to be made. Pressing UP or DOWN button will increase
or decrease the channel number. The corresponding frequency will change accordingly. When
a desired channel is selected, it will be automatically saved and stored in the memory.
2. Battery type setting
Use UP or DOWN button to go to the Battery selection page.
Press UP or DOWN button to move the cursor to either NiMH (rechargeable battery) or AKLN
(Alkaline battery) position.
When a battery type has been selected, it will be automatically saved and stored in the memory.
Remark: NiMH battery must be selected when rechargeable battery is being used. Never
select AKLN (alkaline) when transmitter is intended for charging as alkaline battery isn
’t
rechargeable. Wrong battery selection will result in battery sensing electronics to display wrong
and misleading status information.
3. Sensitivity level setting
Use UP or DOWN button to go to the SENS SET page.
Press UP or DOWN button to increase or decrease the Sensitivity Level of the transmitter.
The MAX level is 4 and the MIN level is 1.When a desired sensitivity level has been selected
for your application, it will be automatically saved and stored in the Memory.
Remark: When selecting Sensitivity level, please bear in mind that Level 1 is for close proximity
singing purposes whereas Level 4 is for use of transmitter on tripod mount for speech purposes.
When Level 4 setting is used for close proximity singing, high SPL input will result in
undesirable distortion in the output.
After performing setting changes, you could turn the protective cover 180° in either direction to
block the buttons from being accidentally adjusted.