CHIAYO MMA-300 - Manual (Page 12)

-11-
UHF handheld microphones（SQ-1016/SQ-1016V/SQ-5016）
1 2 3 5
7
4 6 8
SQ-1016/1016V (UHF 16-freq)
1 2 3 4 5 6
9
10 11
7 8
SQ-5016 (UHF LCD 16-freq)
Microphone parts and functions SQ-1016 SQ-1016V SQ-5016
Cartridge 1 1 1
Battery weak/power LED 2 2 2
Power switch 3 3 3
Channel switch 4 4 -
LCD - - 4
Battery compartment 5 5 5
Bottom cap 6 6 6
Locking button - - 7
Audio mute switch - - -
Setting button - - 8
Up button - - 9
Down button - - 11
Charging port 7 7 10
Volume control - 8 -
Battery installation & indicator
This microphone requires 2 x AA batteries to operate.
To install, remove the battery cover and slide the batteries into the battery compartment &
replace the battery cover.
Note: Batteries contain a corrosive acid that may leak and damage the microphone when
stored for a long period. Batteries should be removed from the microphone before storing
without use for more than 4 weeks.
When the microphone is switched ON a red LED (2) will blink once to indicate the batteries
installed are in good condition. If the LED remains illuminated the batteries have expired
and require replacement.
Channel setting (SQ-1016/1016V)
Please use the attached small screw driver to set the channel.
Volume adjusting (SQ-1016V)
Please slide the wheel to adjust the volume.