D-Link DES-5200 - Manual (Page 15)

Fast Ethernet Switching System User’s Guide
Introduction
8
Rear Panel
The three pronged power plug, ventilation fan and the on/off switch are located at
the rear of the DES-5200, displayed in Figure 4. The switch will work with AC in
the range 100-240 VAC, 50-60 Hz. The power requirements are indicated on the
rear panel of the DES-5200. When installing the DES-5200, leave enough room to
enable you to plug in the power cable.
There are heat vents located on the sides. The fans and the vents help to cool the
DES-5200. Always leave two inches of space around the DES-5200 to that air can
circulate and cool the DES-5200.
Figure 4: DES-5200 Rear Panel
Fan Power On/Off switch
Three pronged power plug