Cloud Electronics VTX4400 - Manual (Page 2)

VTX Series User Manual v1.0 2
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding - type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has
been dropped.
Do not expose the apparatus to dripping or splashing,
and ensure that no objects filled with liquids, such as
vases, are placed on the apparatus.
L’appareil ne doit pas être exposé aux écoulements ou aux
éclaboussures et aucun objet ne contenant de liquide, tel
qu’un vase, ne doit être placé sur l’objet.
The mains plug is used as the disconnect device and it
should remain readily accessible during intended use.
In order to electrically isolate the apparatus from the mains,
the mains plug should be completely removed from the
mains outlet socket.
La prise du secteur ne doit pas être obstruée ou doit être
facilement accessible pendant son utilisation. Pour être
complètement déconnecté de l’alimentation d’entrée, la
prise doit être débranchée du secteur.
This apparatus is of Class I construction and must
only be connected to a mains outlet socket with a
protective earthing connection.
Terminals marked with the ( ) symbol may use
Class 2 Wiring, but voltages at these terminals may be
of sufficient magnitude to constitute a risk of electric shock.
The external wiring connected to these terminals requires
installation by an instructed person or the use of pre-made
leads or cords.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain of moisture .
CAUTION:
Use of controls or adjustments or performance of prodedures other than those specified may result in
hazardous radiation exposure.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD - DO NOT OPEN
AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
The lightning flash with the arrowhead symbol within an equilateral triangle, is intended to alert you to the
presence of uninsulated dangerous voltages within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within and equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS