Cloud Electronics VTX-WM1 - Manual (Page 19)

VTX-WM1 Installation Guide v1.2 19
If the VTX-WM1 is returning error responses, try include a delay between requests (200 ms or so).
Note that commit commands will take longer to execute than update commands.
Response data format
Unit
obj-type=unit
Amplifier level data
name <name>MyAmplifier</name> ASCII string (upto 32 characters)
unit-id
<unit-id>0</unit-id>
Index for this module
model
<model>VTX4120</model>
ASCII string (upto 16 characters)
time <time>2014-02-24
16:28</time>
Current date and time (YYYY-MM-DD hh:mm)
chcount
<chcount>4</chcount>
Number of amplifier channels
cvmask
<cvmask>[0-15]</cvmask>
4-bit mask for Constant Voltage channels.
IP
<ip>192.168.1.45</ip>
Static IP address
subnet <subnet>255.255.255.0</
subnet>
Subnet mask
gate-ip
<gate-ip>192.168.1.100</
gate-ip>
Gateway IP address
Channel
obj-type=channel
Channel level data
chnum
<chnum>[1-4]</chnum>
Channel index from 1 to Unit.chcount
unit-id <unit-id>0</unit-id> Index for this module
level
<level>[0-90]</level>
Rear panel level
(dB attenuation)
remote_
lev
<remote_lev>[0-90]</re-
mote_lev>
Remote level
(dB attenuation)
signal <signal>[-90-+20]</sig-
nal>
Peak input signal level
(dBu)
hstemp <hstemp>[0-120]</hstemp> Heatsink temperature
(degrees Celsius)
link
<link>[Y|N]</link>
Link switch position (rear panel)
bridge <bridge>[Y|N]</bridge> Bridge switch position (rear panel)
hpf
<hpf>[Y|N]</hpf>
High Pass Filter switch position (rear panel)
clip
<clip>[Y|N]</clip>
Clip limiter operation indicator
fanspeed <fanspeed>[Y|N]</
fanspeed>
High speed fan indicator