Code CR900FD - Manual (Page 7)

7
D020215_02_CR900FD_User_Manual
7.0 - Reader Feedback
8.0 - Symbologies Defaulted On 9.0 - Symbologies Defaulted Off
The following are symbologies that have a default of ON.
To turn symbologies on or off, scan the symbology barcodes
located in the CR900FD Configuration Guide located on our
website at www.codecorp.com/files.php.
Codabar
Code 39
Code 93
Code 128
Code barcode readers can read a number of barcode symbologies
that are not enabled by default. To turn symbologies on or
off, scan the symbology barcodes located in the CR900FD
Configuration Guide located on our website at
www.codecorp.com/files.php.
Codablock F
Code 11
Code 32
IATA 2 of 5
Maxicode
Matrix 2 of 5 Interleaved 2 of 5
MSI Plessy
UPC/EAN/JAN
Scenario Top LED Light Sound
CR900FD Successfully Powers Up Green LED Flashes 1 Beep
CR900FD Successfully Enumerates with Host (via cable) Once Enumerated, the Green LED turns Off 1 Beep
Attempting to Decode Green LED Light is Off None
Successful Decode and Data Transfer Green LED Flashes 1 Beep
Configuration Barcode Successfully Decoded and Processed Green LED Flashes 2 Beeps
Configuration Barcode Successfully Decoded but Wasn’t
Successfully Processed Green LED Flashes 4 Beeps
Micro PDF417
NEC 2 of 5
Pharmacode
Plessey
Standard 2 of 5
Telepen
Trioptic
10.0 - Enabling 2D Symbology Decoding
To turn a 2D symbology on or off, scan the preferred symbology configuration barcodes located in the CR900FD Configuration Guide. Users may
enable a single 2D symbology at a time. If a mistake is made, the symbology can be changed by scanning a different symbology barcode. There is
a limit of ten changes.
A license key is available to enable the entire 2D symbology suite. For license information contact [email protected].